PVD100 Current Meter Counter
The HyQuest Solutions Point Velocity Display PVD100 is a small electronic device for measuring ﬂow velocity from almost any mechanically rotating current meter. It shows the velocity on its LCD directly in m/sec or ft/second. To calculate discharges, serial data…
|Velocity Precision||0.001 m/sec or 0.01 ft/sec|
|Timing Accuracy||+/- 0.001 s|
0.015 m/sec to more than 6.1 m/sec
slow-speed mode: improves measurements with extremely slow rotating current meters (velocities less than 0.076 m/sec)
|Operating Conditions:||-5 °C to +50 °C, non condensing, IP65|
|Bluetooth®||Optional, Class 2 / Output power 2.5 mW (4 dBm), compliant Bluetooth® Spec V1.1, up to 10 m (30 ft) range (operating at 2.4 GHz)|
|Communications||RS232 Port (Tx, Rx) @ 19200 baud 8/N/1|
2 x Internal AA alkaline 1.5V batteries (not included)
Low battery indication 2.8V
Hibernation after 5 min
|Dimensions||120 mm x 80 mm x 22 mm (L x W x D)|
|Mass||218 grams (with batteries)|
The HyQuest Solutions Point Velocity Display PVD100 is a small electronic device for measuring ﬂow velocity from almost any mechanically rotating current meter. It shows the velocity on its LCD directly in m/sec or ft/second. To calculate discharges, serial data can be transmitted to an external computer. A very important feature is the automatic detection of signal shorts accompanied by an alarm to the operator who may decide on repeating the measurement. All important settings are saved in memory, eliminating the burden of re-conﬁguring the device when the unit is turned back on.
The PVD100 does not need to be connected to an external device to operate. The visual indicators, LCD and internal buzzer can be used to make a conventional current meter measurement and to compute water velocity.
Cleaning signals and avoiding noise
The PVD100 cleans the signal from a mechanically rotating current meter such as a Price AA, HS OSSB1 or HS OSS-PC1 meter. Thereby, miscounting and double counting are avoided.
The PVD100 offers connectivity between the current meter and a hand-held computer using either a connecting lead or an optional Bluetooth® wireless interface. It can be mounted directly onto a top-setting wading rod. Faulty connections are detected. Commands for performing a measurement and making operating selections can be sent.
Extended Measurement Range
The PVD100 can operate in two different velocity range modes supporting both typical and extremely slow rotating current meters (see Technical Speciﬁcations).
- Direct velocity reading
- Digitally processes and cleans signals from catwhisker and magnetic head meters
- Works in high conductivity water (> 50,000 µSiemens)
- Self-contained unit with 2 x 8 character LCD display showing total meter counts and elapsed time
- Operates with any ﬁeld computer
- Signal Driver for AquaCalc(s), Sutron DMX and HyQuest Solutions CMC Series meter counters
- Fully self calibrating
- Self Test’ for serial interface setup
- Can be used to adjust current meter contacts (measures meter ‘dwell angle’)
- Can display and produce ‘spin test’ record
- Counter for water velocity and water ﬂow measurements with current meter in small and big water courses and open channels
- Counts are usable as input data for discharge calculation.
- The device counts contacts closures or electronic switched pulses.